Earth-Moon-Earth communication (EME), also known as moon bounce, is a radio communications technique which relies on the propagation of radio waves from an Earth-based transmitter directed via reflection from the surface of the Moon back to an Earth-based receiver.

History Edit

The use of the Moon as a passive communications satellite was proposed by W.J. Bray of the British General Post Office in 1940. It was calculated that with the available microwave transmission powers and low noise receivers, it would be possible to beam microwave signals up from Earth and reflect off the Moon. It was thought that at least one voice channel would be possible.[1]

The "moon bounce" technique was developed by the United States Military in the years after World War II, with the first successful reception of echoes off the Moon being carried out at Fort Monmouth, New Jersey on January 10, 1946 by John H. DeWitt as part of Project Diana.[2] The Communication Moon Relay project that followed led to more practical uses, including a teletype link between the naval base at Pearl Harbor, Hawaii and United States Navy headquarters in Washington, DC. In the days before communications satellites, a link free of the vagaries of ionospheric propagation was revolutionary.

Later, the technique was used by non-military commercial users, and the first amateur detection of signals from the Moon took place in 1953.

EME communications technical details Edit

As the albedo of the Moon is very low (maximally 12% but usually closer to 7%), and the path loss over the 770,000 kilometre return distance is extreme (around 250 to 310 dB depending on VHF-UHF band used, modulation format and Doppler shift effects), high power (more than 100 watts) and high-gain antennas (more than 20 dB) must be used.

In practice, this limits the use of this technique to the spectrum at VHF and above.

The Moon must be above the horizon in order for EME communications to be possible.

To determine EME Path Loss we need to know -

  1. Moon distance from either the transmitting or receiving station
  2. Transmitter station output in watts, expressed as ERP [roughly transmitter power output (minus feedline loss) x forward antenna gain]
  3. Receive station gain (actual receiver gain minus feedline loss, x antenna gain)
  4. The operating frequency of the transmitter and receiver

Free space loss from an isotropic omnidirectional antenna is described by this formula. It calculates the surface area of an imaginary sphere of radius, d, that the radio wave illuminates uniformly:

  1. Loss = $ (\frac{4\pi d}{\lambda})^2 $ where pi ≈ 3.14, d = distance and lambda = wavelength, in meters
  2. Lambda = c/F F = Hz, c = $ 3*10^8 $ meters/sec.
  3. Lambda = $ \frac{300}{F} $ when F is in MHz.

Substituting F into the free-space loss formula and converting to d into km:

  • Loss = $ 4*\pi *10^3 *F*\frac{d}{300} $ or
  • Loss(dB) = $ 32.45 + 20\log{F} + 20\log{d} $

Adding factors for reflection from the Moon results in

  • Loss-eme(dB) = 32.45 + 20Log(F) + 20Log(2*d) + 50.21 - 10Log(.065)

The standard radar path link formula is basis for EME path-loss calculations

  • $ P_r = P_t*G_t*G_r*Loss $
  • Loss = $ \rho*\lambda^2/(4*pi*)^3 *d^4 $

After including the factor for surface reflectivity it becomes

  • $ Loss_{EME} \mathrm{(dB)} = 100.4 + 20 \log(F) + 40 \log(d) - 10 \log(\rho) $
  • $ \rho = 0.065*\mathrm{D}^2 * \pi / 4 $ where $ \mathrm{D} $ is the Moon's diameter

Since the diameter of the Moon is ≈ 3500 km

  • $ \rho = 6.25 * 10^{11} m^2 $

The formula becomes

  • Loss-eme(dB) = 20Log(F) + 40Log(d) - 17.49, F = MHz, d = km

For some reason not specified, Josef has increased the loss by 3-dB producing:

  1. Loss-eme(dB) = 103.4 + 20Log(F) + 40Log(d) - 10Log(rho) or
  2. Loss-eme(dB) = 20Log(F) + 40Log(d) - 14.49

Note that the distance from the Earth to the Moon varies because the orbit of the Moon is not perfectly circular, it is somewhat elliptical with a mean radius of 240,000 miles. This means there is an apogee (the largest distance) and a perigee (the shortest distance). In addition, the orbital plane precesses with a principal period of 18.6 years.

Depending on the position of the Moon with respect to the Earth, Apogee can be as much as 406,700km, while Perigee can be as little as 356,400km.

  • This translates to as much as 2.25dB difference in path loss from apogee to perigee.
  • The mean distance from Earth to Moon is given as 384,400km.
  • These calculations consider the fact that the Moon is only 7% efficient as a reflector, use the radar equation (which defines a two-way path-loss model) and the assumption that the Moon is a spherical reflector.

Current EME communications Edit

Amateur radio (ham) operators utilize EME for two-way communications. EME presents significant challenges to amateur operators interested in working weak signal communications. Currently, EME provides the longest communications path any two stations on Earth can utilize for bi-directional communications.

Amateur operations use VHF, UHF and microwave frequencies. All amateur frequency bands from 50 MHz to 47 GHz have been used successfully, but most EME communications are on the 2 meter, 70-centimeter, or 23-centimeter bands. Common modulation modes utilized by amateurs are continuous wave with Morse Code, digital (JT65) and when the link budgets allow, voice.

Recent advances in digital signal processing have allowed EME contacts, admittedly with low data rate, to take place with powers in the order of 100 Watts and a single Yagi antenna.

World Moon Bounce Day, June 29, 2009, was created by Echoes of Apollo and celebrated world-wide as an event preceding the 40th anniversary of the Apollo 11 Moon landing. A highlight of the celebrations was an interview via the Moon with Apollo 8 astronaut Bill Anders. He was also part of the backup crew for Apollo 11. The University of Tasmania in Australia with their 26m dish was able to bounce a data signal off the surface of the Moon which was received by a large dish in the Netherlands - Dwingeloo Radio Observatory. The data signal was successfully resolved back to data setting a world record for the lowest power data signal returned from the Moon with a transmit power of 3 milliwatts - about 1,000th of the power of a strong flashlight filament globe. World Moon Bounce Day 2010 was set to precede the Apollo 13 mission sometime in early 2010. The second World Moon Bounce Day was April 17, 2010 and coincided with the landing of Apollo 13 on its 40th anniversary.

In October 2009 visual artist Daniela de Paulis and the CAMRAS radio amateurs association based at Dwingeloo radio telescope (NL) developed a new application of Moonbounce, called Visual Moonbounce, which allows moonbouncing images using the MMSSTV software. The technology was applied to a live performance called OPTICKS during which digital images are sent to the Moon and back in real time and projected live.

Modulation types and frequencies optimal for EME Edit




Other factors influencing EME communications Edit

Doppler effect at 144MHz band - 300 Hz at Moonrise/set

  • At Moonrise, returned signals will be shifted approximately 300 Hz higher in frequency due to the Doppler effect between the Earth and Moon.
  • In the Northern Hemisphere, as the Moon traverses the sky to a point due south the Doppler effect approaches nothing. As the Moon sets, signals are shifted lower in frequency until at Moonset they are shifted 300 Hz lower.
  • Doppler effects cause many problems when tuning into and locking onto signals from the Moon.


Gallery Edit


  1. Pether, John (1998). The Post Office at War. Bletchley Park Trust.
  2. Butrica, Andrew J. (1996). To See the Unseen: A History of Planetary Radar Astronomy. NASA.

See alsoEdit

External links Edit

  • [2] World Moon Bounce Day - Echoes of Apollo
  • [3] Amateur Radio - August 2009 - Wireless Institute of Australia

Template:RF Propagation Navbox